BIS Testing for CCTV Cameras: Types of Tests, Standards and Certification Requirements

• BIS testing for CCTV cameras helps establish compliance with applicable Indian safety requirements.
• CCTV cameras covered by the Compulsory Registration Scheme (CRS) must meet the relevant requirements before being sold in India.
• Non-analog CCTV cameras covered by the notified security requirements need to meet the applicable additional security testing requirements.
• Analog CCTV cameras are exempt from the specific notified CCTV security requirements, but this does not automatically exempt them from applicable BIS safety registration.
• Manufacturers should verify the current Indian Standard and transition requirements before arranging testing.
• A laboratory test report is not the same as BIS registration or certification.
• Diligence Certifications is a compliance consultancy, not a physical testing laboratory. Its exact CCTV-related services should be confirmed before engagement.

---

Introduction

CCTV cameras are commonly found in offices, factories, residential buildings, shopping centres, warehouses, hospitals and many other places where people want to keep an eye on what’s happening. When the need for CCTV cameras increases manufacturers and importers have to make sure that their CCTV cameras follow the safety and security rules before they can put them up for sale in the market.

BIS testing, for CCTV cameras is a part of this process. The Bureau of Indian Standards or BIS manages the Compulsory Registration Scheme, which applies to products that are required by law. CCTV cameras and CCTV recorders that are included in these rules have to meet the standards and follow the registration conditions.

However, CCTV compliance is not limited to electrical safety. The Government of India has also introduced Essential Requirements (ERs) for CCTV security. These requirements address security-related aspects of the camera’s hardware, software, interfaces and firmware.

The testing needs change depending on the type of product. An old-style analog CCTV camera and a modern internet-connected IP camera might require kinds of security checks. Companies also need to figure out which safety rules apply. They must stay aware of any updates or changes in the rules and processes.

This guide covers the types of CCTV tests the BIS rules that are relevant the security requirements the documents needed, the registration steps and things to consider when preparing a CCTV product, for the market.

---

Why Is BIS Testing for CCTV Cameras Important?

BIS testing helps manufacturers and importers evaluate whether their products meet the applicable requirements. It also supports product quality, market access and regulatory compliance.

1. Product Safety

CCTV cameras contain electronic components, circuit boards, power-related components and other parts that must meet the relevant safety requirements.

Testing against the applicable Indian Standard helps evaluate the product’s safety characteristics. The exact tests depend on the standard, product design and configuration.

2. Regulatory Compliance

Certain CCTV products fall under Indias Compulsory Registration Scheme. If registration is required a business must finish the steps before selling the CCTV products. A lab test report is a part of the process but the lab test report does not replace the required registration.

3. CCTV Security Requirements

CCTV cameras that connect to a network can bring cybersecurity risks. If the interfaces, firmware, communication protocols or access controls of these CCTV cameras are not well protected danger rises. The notified Essential Requirements for CCTV security cover these issues. They do so with technical checks and supporting documentation for CCTV cameras.

4. Import and Market Access

If you are an importer you must check the compliance status of a CCTV camera before you place orders. A manufacturer’s certificate or overseas test report should never be treated as a direct replacement for the required Indian standards for CCTV cameras. Early compliance checks can help businesses plan testing, documentation and registration for CCTV cameras, before shipment.

5. Better Product Documentation

The testing process needs accurate product information. This includes model numbers, technical specifications and details about any hardware or software involved. Keeping documentation up, to date and consistent helps manufacturers track product changes. It also makes it easier to show what was tested and registered when needed.

---

Types of Testing Required for CCTV Cameras

The testing programme depends on the camera category, applicable standard and regulatory requirements. Safety testing and security testing should be treated as separate but potentially complementary parts of the compliance process.

Electrical and Product Safety Testing

CCTV cameras covered by CRS must meet the applicable product safety requirements.

Depending on the standard and product configuration, testing may assess:

• Protection against electric shock.
• Electrical insulation and relevant safety clearances.
• Temperature-related safety.
• Fire-related safety characteristics.
• Mechanical and construction-related safety.
• Safety of relevant power interfaces and components.

These are examples of areas that may be evaluated under the applicable standard. The exact test programme should be confirmed with a laboratory competent to perform the required tests.

Hardware Security Testing

Hardware security testing examines relevant hardware features that could affect the security of the CCTV device.

Depending on the notified requirements, this may include examining:

• System-on-Chip (SoC) information.
• Printed circuit board assembly (PCBA) details.
• Hardware interfaces and debugging ports.
• USB, UART, JTAG, SWD or other relevant interfaces.
• Access controls for enabled interfaces.
• Hardware and manufacturing documentation.

The purpose is to establish whether the product’s hardware configuration and related controls meet the applicable security requirements.

Software and Firmware Security Testing

CCTV cameras may rely on embedded software and firmware to control recording, communication, device configuration and remote access.

The applicable security evaluation may examine areas such as:

• Firmware update mechanisms.
• Software and firmware version information.
• Security of debugging interfaces.
• Access control and authentication.
• Exposed network services.
• Communication protocols.
• Data storage and encryption.
• Relevant software documentation.

The actual scope depends on the applicable Essential Requirements and testing guidelines. Manufacturers should obtain the current technical checklist before submitting a product.

Network Security Assessment

Network-connected CCTV cameras communicate with recorders, applications, local networks or remote systems.

Depending on the required testing procedure, relevant security checks may cover exposed network services, communication behaviour, authentication mechanisms and other network-related vulnerabilities.

Manufacturers should provide accurate technical information about the device’s supported interfaces and network functionality.

Testing of CCTV Recorders

CCTV recorders, including applicable digital video recorders (DVRs) and network video recorders (NVRs), may also fall within the relevant CRS product category.

Their compliance requirements should be assessed according to the product classification, current standard, registration scope and applicable security requirements.

A camera’s registration should not automatically be assumed to cover a separate recorder or a different product category.

---

BIS Standards for CCTV Cameras in India

The applicable Indian Standard is one of the first things manufacturers should confirm before arranging testing.

IS 13252 (Part 1):2010

IS 13252 (Part 1):2010 has been used for the safety requirements of CCTV cameras and CCTV recorders under the CRS framework.

The standard addresses information technology equipment safety. The relevant testing requirements depend on the product and its configuration.

IS/IEC 62368-1:2023

BIS has issued the standard IS/IEC 62368‑1:2023 for electronic and information technology products, including CCTV cameras and CCTV recorders.

The BIS CRS product listings and migration guidance give details about IS/IEC 62368‑1:2023 and the security requirements that come with IS/IEC 62368‑1:2023.

Businesses must look at the implementation guidelines and transition provisions before choosing the standard for an application or an existing registration.

Do not assume that the older or newer standard applies to every CCTV application.

Confirm the requirements, for the product the application date and the registration status.

Essential Requirements for CCTV Security

In addition to applicable safety requirements, the Government of India notified Essential Requirements for CCTV security under the relevant regulatory framework.

For CCTV cameras covered by the requirements, security compliance can involve technical evaluation of hardware, software and related security features.

The requirements were introduced under the Public Procurement (Preference to Make in India) framework and subsequently incorporated into the CCTV CRS framework.

The relevant implementation dates and procedures differ by regulatory context. Businesses should check the current official notifications and instructions before starting the process.

---

Why Is the Applicable Standard Important?

Selecting the correct standard and compliance route helps avoid unnecessary testing and documentation problems.

Before submitting a CCTV product for testing, verify:

• The exact product category.
• The currently applicable Indian Standard.
• Any revised-standard implementation or transition requirements.
• Whether the product is covered by the notified security requirements.
• The accepted laboratory and report requirements.
• The registration or amendment procedure applicable to the product.

Official BIS and MeitY information should take priority over older supplier documents or informal advice.

---

Are All CCTV Cameras Required to Undergo Security Testing?

No. The notified security requirements distinguish analog CCTV cameras from other covered CCTV cameras.

Analog CCTV Cameras

BIS issued a clarification dated 1 April 2025 confirming that analog CCTV cameras are not required to undergo testing for the specifically notified Essential Requirements for CCTV security.

However, this exemption concerns the additional security requirements. It does not automatically exempt analog CCTV cameras from applicable safety testing or CRS registration.

Manufacturers should also ensure that the product is correctly identified as analog in the relevant technical documentation and test reports, as required by the applicable procedure.

IP-Based and Other Non-Analog CCTV Cameras

CCTV cameras other than analog cameras may be subject to the notified security requirements, depending on the applicable regulatory provisions.

These products may need to undergo the relevant security evaluation in addition to the applicable safety testing.

Manufacturers should verify the current requirements for the product and avoid combining analog and non-analog models in an application where the applicable guidelines require separate treatment.

---

BIS Testing Process for CCTV Cameras: Step-by-Step Guide

The exact procedure depends on the camera type, applicable standard and current registration requirements. A typical compliance process involves the following stages.

Step 1: Identify the CCTV Product Category

First I will check if the item is a CCTV camera, a DVR, an NVR or another type of surveillance device. Then I will note the brand, the model number, the specifications the power arrangement and the intended use. I will also verify whether the CCTV camera is analog or not analog. This difference can affect the security testing that is needed.

Step 2: Confirm the Applicable Standard and Security Requirements

Check the BIS CRS product listings and any relevant notifications.

Make sure to confirm the safety standard that applies. Also verify if the camera must meet the Essential Requirements, for CCTV security.

If there is a revised standard or a transition arrangement follow the implementation guidelines in place.

Step 3: Prepare the Product Sample

Prepare a representative product sample in the configuration intended for testing.

The sample should match the declared product details, including relevant hardware and firmware versions.

If several models are proposed under one series, determine whether the models qualify for grouping under the applicable guidelines. Differences in hardware, chipset, interfaces or firmware may affect the permitted scope.

Step 4: Prepare Technical Documentation

I think you should gather the products details and supporting records before you send the sample.

For safety testing the laboratory may need product specifications and other documents that are relevant, to the standard.

For security testing of the product more hardware and software documentation might be necessary. Preparing this information ahead of time can help avoid delays during evaluation

.

Step 5: Arrange Safety Testing

Submit the product to a laboratory that is recognised or accepted for the applicable testing route.

For CCTV products under CRS, follow the current BIS requirements for safety testing and test reports.

The laboratory evaluates the product against the relevant standard and records the test results. Any identified non-conformity should be addressed through the appropriate process.

Step 6: Arrange Applicable Security Testing

For CCTV cameras that’re under the security rules that have been officially announced make sure to do the proper security check using the approved testing method.

The MeitY notice that was sent on February 4 2026 says that the STQC Directorate gives security test reports based on the CCTV security rules, for the CRS and the public buying system.

Manufacturers need to look at the instructions to make sure they know the correct testing method the papers they need and the report rules for their particular use.

.

Step 7: Review the Test Reports

Please review the reports to ensure that the manufacturer details are correct that product identification is accurate that the model numbers match and that the applicable standards are listed. Check that the reports cover the model or the permitted model series. When safety testing and security testing are both required, ensure that the necessary reports and supporting documents are available. I hope you find this helpful.

Step 8: Submit the Applicable Registration or Amendment Application

After the required testing and documentation are ready complete the BIS application or amendment procedure through the system. Application must be completed through the system.

The documents required depend on whether the application’s for a new registration for model inclusion for a change in the registered scope or for another permitted procedure. Documents vary with the type of application.

Follow the portal instructions and respond to any requests, for clarification or additional information. Application queries should be answered promptly.

Step 9: Verify Registration and Model Coverage

Before selling a product make sure that the proper registration and compliance papers include the product that you plan to sell.

A registration for one model should not be considered as permission for all other models that are sold by the same brand.

Store the test reports, registration records, product details and all related papers so they are easy to find for any checks, about following the rules.

---

Documents Required for BIS Testing and CCTV Registration

The exact document checklist depends on the product category, testing scope and application type.

Commonly relevant documents may include:

• Manufacturer’s name and address.
• Manufacturing-site details.
• Brand name and model number.
• Product specifications and technical datasheet.
• Product photographs and labels.
• Relevant circuit diagrams and technical drawings, where required.
• System-on-Chip (SoC) datasheet.
• Hardware Bill of Materials (BoM), where required.
• Printed circuit board assembly information.
• Software and firmware version details.
• Software Bill of Materials (SBOM), where required.
• Details of interfaces and communication protocols.
• Test reports from the appropriate laboratory.
• Declarations and application documents.
• Authorisation documents, where applicable.
• Other documents requested by BIS or the designated testing authority.

Not every document applies to every CCTV camera. Manufacturers should follow the current official checklist and the laboratory’s instructions.

Product details should remain consistent across the sample, technical documents, test reports, application and product labelling.

---

How to Choose the Right CCTV Testing Laboratory

Selecting a suitable laboratory is important because CCTV safety testing and security testing may require different technical capabilities.

Check the Laboratorys Testing Scope

Make sure the laboratory can perform the tests that your product needs. Also make sure the laboratory’s testing scope matches the route that applies to your product.

Do not assume that a laboratory that offers electronic testing is authorised or equipped to conduct every CCTV security assessment. Only laboratories with the authorisation can do every CCTV test.

Verify Recognition or Authorisation

For BIS safety testing confirm that the laboratory meets the BIS recognition requirements. The laboratory must have the BIS recognition for safety testing.

For CCTV security testing verify the MeitY instructions and the accepted testing route. STQC has a role, in the notified CCTV security framework. Be sure that the laboratory follows these guidelines.

Review Technical Experience

Consider the laboratory’s experience with the relevant CCTV product category, hardware configuration and security requirements.

A clear understanding of the testing scope can help manufacturers prepare suitable samples and documentation.

Confirm Report Acceptance

Before sending samples make sure that the report you are planning to get is accepted for the registration or compliance process.

A report that works well for internal product development might not be enough, for an application.

Compare Cost and Turnaround Time

Ask for a written quote that clearly states the test scope the samples needed the estimated time to finish and any extra costs.

Prices and time frames vary depending on the product setup the number of tests the labs schedule and any extra testing that might be needed.

---

Common Mistakes to Avoid During CCTV Camera Testing

Using an Outdated Standard

Relying on an old test report without checking revised-standard requirements can create problems during registration or model inclusion.

Always confirm the currently applicable standard and transition instructions.

Ignoring Security Requirements

A safety test report does not necessarily establish compliance with the notified CCTV security requirements.

Check whether the camera needs both safety and security testing.

Incorrectly Classifying an Analog Camera

The specific exemption for analog CCTV cameras relates to the notified security requirements. Manufacturers should accurately document the product type and still meet any applicable safety registration obligations.

Providing Incomplete Technical Information

Missing model details, inconsistent firmware information or incomplete hardware documentation may lead to additional queries.

Prepare the relevant technical records before testing begins.

Grouping Different Models Without Verification

Different models may use different chipsets, hardware designs or firmware versions. Do not assume they can all be covered by one report or registration scope without checking the applicable model-series guidelines.

Treating a Test Report as BIS Registration

A test report records the results of the specified tests. Where registration is mandatory, the relevant registration process must also be completed.

Relying Only on a Supplier’s Certificate

An overseas certificate or supplier declaration does not automatically replace Indian regulatory requirements. Verify the product’s compliance status through the relevant official process.

---

BIS Testing for CCTV Cameras: Cost and Time

There is no single testing price or guaranteed completion time for every CCTV camera.

The overall cost and duration depend on several factors:

• Applicable standard: The required safety standard affects the testing scope.
• Security testing: Covered non-analog cameras may need an additional security evaluation.
• Product configuration: Hardware, firmware and model-series differences can affect the work required.
• Documentation: Missing or inconsistent records may delay the process.
• Laboratory availability: Testing schedules depend on available capacity.
• Corrective work: If a product does not meet the relevant requirements, further development and testing may be necessary.
• Registration procedure: The time required for registration or model inclusion is separate from laboratory testing.

To obtain a realistic estimate, provide the laboratory or compliance service provider with the product category, model details, applicable requirements and available documents. Request a written scope and estimated timeline before committing to a commercial launch.

---

BIS Testing for CCTV Cameras for Manufacturers, Importers and Exporters

For Manufacturers

Manufacturers should identify the applicable standards and security requirements early in product development.

Preparing technical documentation and checking the hardware and firmware configuration before testing can help reduce avoidable delays.

For Importers

Importers should verify the product’s compliance status and registration scope before placing commercial orders.

Where registration is mandatory, ensure that the relevant manufacturer and product have completed the applicable procedure before the goods are marketed in India.

For Exporters and Overseas Brands

Foreign manufacturers supplying CCTV cameras to India should not assume that approvals from another country automatically satisfy Indian requirements.

They should review the Indian safety and security framework, prepare the required documentation and confirm the applicable arrangements for overseas manufacturers and authorised representatives.

For CCTV Brand Owners

Brand owners should ensure that product names, model numbers and technical information are consistent across supplier documents, testing records and registration applications.

Any material change in hardware or software should be reviewed to determine whether additional testing or an amendment is required.

---

How Diligence Certifications Can Help with CCTV Compliance

Understanding BIS requirements can be challenging, particularly when a CCTV product needs both safety testing and additional security evaluation.

Diligence Certifications is a compliance consultancy, not a physical CCTV testing laboratory. Businesses considering its support should confirm the company’s current service scope directly before engaging it for CCTV-related work.

Depending on the services available, compliance consultancy may involve:

• Understanding the applicable Indian Standard.
• Identifying relevant documentation requirements.
• Clarifying the difference between safety testing and security testing.
• Understanding the BIS registration process.
• Coordinating compliance-related steps where the service is offered.
• Reviewing the documentation needed for an application.

Physical testing must be conducted through a suitable laboratory that meets the requirements of the applicable testing route. Any claims about laboratory partnerships, testing authorisation or CCTV-specific services should be independently verified before publication.

Businesses seeking assistance can contact Diligence Certifications to discuss their product category, documentation and compliance requirements.

---

Conclusion

BIS testing for CCTV cameras is a step when getting ready surveillance products for the Indian market. BIS testing for CCTV cameras requires manufacturers and importers to find the safety standard grasp the required security rules that have been notified and finish all the testing and registration steps.

Analog CCTV cameras are exempt from the notified CCTV security testing yet safety duties may still be, in force. Other cameras that are covered may have to go through both safety testing and security assessment.

You should check the standard the transition rules, the laboratory path and the documentation needs against the newest official BIS and MeitY guidance. A single test report is not proof that every registration or compliance duty is finished.

By preparing accurate technical documentation and selecting the appropriate testing route, businesses can make the CCTV compliance process more organised and reduce avoidable delays.

Frequently Asked Questions

---