- Water repellency testing in textiles checks how well a fabric resists wetting when water falls or splashes on it.
- Water repellent, water resistant and waterproof are three different things. Do not mix them up.
- The most common tests are the spray test, rain test, hydrostatic head test and water absorption test.
- Standards like AATCC, ISO and EN give a fixed method, so results can be compared between labs.
- Washing, rubbing and ageing can reduce repellency, so durability testing matters.
- Always test in a recognised, accredited lab and check the method before you send samples.
Introduction
This is exactly why water repellency testing in textiles is so important. It tells you, with proof, how your fabric behaves when water touches it. Not by guess. Not by “it looks fine.” By a proper test.
In this blog, we will keep things very simple. We will talk about what the test is, which methods are used, which standards apply, and how you can avoid common mistakes. If you are a manufacturer, exporter, buyer or a student, this guide is for you.
What Is Water Repellency Testing in Textiles?
Water repellency testing in textiles is a set of lab tests that check how well a fabric stops water from wetting its surface. A good water repellent fabric makes water form small beads. The beads then roll off. The fabric stays dry on the outside.
Most water repellent fabrics get this property from a special finish. This finish is often called DWR, which means durable water repellent. It lowers the surface energy of the fabric, so water cannot spread and soak in.
The test tells you three simple things:
- Does water bead up on the fabric or does it spread?
- How much of the surface gets wet?
- Does the fabric keep this property after washing or wear?
Water Repellent vs Water Resistant vs Waterproof
This is where most people get confused. Let us clear it in one table.
| Term | What it means | Simple example |
|---|---|---|
| Water repellent | Surface sheds water for a short time. Heavy or long rain can still get through. | Light rain jacket, umbrella cloth |
| Water resistant | Fabric slows down water entry, usually because of tight weave or coating. | Windcheater, school bag |
| Waterproof | Fabric stops water completely, even under pressure. Seams are usually sealed. | Raincoat, tent, diving suit |
So, a fabric can be water repellent and still not be waterproof. Writing “waterproof” on a label without proper testing can create trouble with buyers and even legal issues.
Why Is Water Repellency Testing Important?
You may think, “Our fabric already feels water repellent by hand.” But hand feel is not a test. Here is why lab testing is needed.
- Buyer requirements: Most export buyers ask for a test report with a clear method and rating.
- Product claims: If you say “water repellent” on the label, you must be able to prove it.
- Quality control: Testing helps you find weak batches before bulk shipping.
- Finish selection: You can compare two finishes and pick the better one.
- Durability check: You learn how many washes the finish can survive.
- Fewer returns and complaints: Good testing saves money in the long run.
Which Textile Products Need Water Repellency Testing?
Many products need this test. Some of the common ones are:
- Rain jackets and windcheaters
- Outdoor and sports clothing
- Uniforms, workwear and school wear
- Umbrellas, tents and awnings
- Bags, backpacks and luggage fabric
- Upholstery and furniture fabric
- Car seat covers and car covers
- Footwear uppers and gloves
- Medical and protective textiles
Main Methods Used in Water Repellency Testing
There is no single test that does everything. Each method checks a different side of the fabric. Let us go through the most common ones.
1. Spray Test
This is the most popular test. Water is sprayed on a fabric sample held at an angle on a hoop. After spraying, the lab compares the wet pattern on the surface with a standard chart. The fabric gets a rating, usually from 0 to 100 or from 1 to 5, depending on the method.
A higher rating means the fabric is more water repellent. It is quick, cheap and widely accepted. Common standards are AATCC 22 and ISO 4920.
2. Rain Test
This test copies real rain. A fabric sample is placed under a spray head for a fixed time. Blotting paper is kept behind the fabric. After the test, the lab weighs the paper to see how much water came through.
This is a better check for how water goes through the fabric, not just how it wets the surface. A common standard is AATCC 35.
3. Bundesmann Test
This is a more detailed rain test used for outerwear fabrics. The fabric is rubbed gently from behind while artificial rain falls on it. The lab checks the water absorbed, the water that passes through and how the surface looks afterwards. The common standard is ISO 9865.
4. Hydrostatic Head Test
This test checks how much water pressure a fabric can take before water leaks through. Water pressure is slowly increased on one side of the fabric. The lab notes the pressure at which the third drop appears.
This test is very important for waterproof claims. Common standards are AATCC 127 and ISO 811.
5. Water Absorption Test
This test checks how much water the fabric soaks up when it is dipped or kept in contact with water. The weight of the sample before and after is compared. It is useful for towels, upholstery and technical textiles.
6. Water Drop or Contact Angle Test
A small water drop is placed on the fabric. The lab checks how long it takes to soak in, or measures the angle between the drop and the surface. A bigger angle means better repellency. The AATCC 193 method also checks resistance to different water and alcohol mixtures.
7. Oil Repellency Test
Some fabrics also need to repel oil and stains, not only water. For that, an oil repellency test is done, using standards like AATCC 118 or ISO 14419. This is common for workwear and stain-resistant fabrics.
Quick Comparison of Test Methods
| Test | What it checks | Common standard | Best for |
|---|---|---|---|
| Spray test | Surface wetting | AATCC 22, ISO 4920 | Jackets, uniforms, general fabrics |
| Rain test | Water passing through | AATCC 35 | Rainwear, tents |
| Bundesmann test | Absorption and penetration under rain | ISO 9865 | Outerwear fabrics |
| Hydrostatic head | Pressure the fabric can hold | AATCC 127, ISO 811 | Waterproof fabrics |
| Water absorption | Water soaked by the fabric | Method as per buyer or lab | Towels, upholstery |
| Contact angle or drop test | Beading and soak-in time | AATCC 193 and lab methods | Finish checks |
Please note that standards get revised from time to time. Always check that your lab is using the latest version, or the version your buyer has asked for.
How to Read a Spray Test Rating
In the spray test, the lab compares the wet surface with a standard rating chart. Here is the simple meaning, in the common 0 to 100 scale.
| Rating | What you see on the fabric |
|---|---|
| 100 | No sticking or wetting of the surface |
| 90 | Slight random sticking or wetting |
| 80 | Wetting at spray points |
| 70 | Partial wetting of the whole surface |
| 50 | Complete wetting of the whole surface |
| 0 | Complete wetting of both upper and lower surface |
Many buyers want a minimum rating of 80 or 90 for new fabric. But the exact number depends on the buyer and the product. So always ask for the requirement first.
Water Repellency Testing Standards
Standards give a fixed method. This means two labs doing the same test should get similar results. Here are the main standard bodies you will see in test reports.
- AATCC: American Association of Textile Chemists and Colorists. Very common in export orders.
- ISO: International Organization for Standardization. Used worldwide.
- EN: European standards, often adopted along with ISO.
- BS and JIS: British and Japanese standards, sometimes asked by specific buyers.
A simple example: a European buyer may ask for ISO 4920 spray test after five washes. An American buyer may ask for AATCC 22 spray test before and after laundering. Same idea, different method. Read the order carefully.
BIS Standards for Water Repellency Testing in India
If you test fabric in India, you will often see BIS standards in the report. BIS means Bureau of Indian Standards. It publishes Indian Standards (IS), and many of them match international ISO methods word for word. So a BIS test and an ISO test can be the same method with two numbers.
Here are the main BIS standards linked with water repellency and water resistance of textiles.
| BIS standard | What it covers | Where it is used |
|---|---|---|
| IS 390:2024 (same as ISO 4920:2012) | Resistance to surface wetting of fabric by the spray test | Uniforms, nylon fabrics, coated and treated fabrics, general apparel fabric |
| IS 7016 (Part 7):2023 (same as ISO 1420) | Resistance to penetration by water for rubber or plastics coated fabrics | Coated fabrics, rainwear, covers |
| IS 15891 (Part 17):2017 (same as ISO 9073-17) | Water penetration of nonwovens by spray impact | Nonwoven fabrics |
| IS 3322:2023 | Specification for rubber or plastics coated fabrics for water resistant clothing | Rain clothing |
| IS 16126:2013 | Specification for waterproof tarpaulins made from woven polyester fabric | Tarpaulins and covers |
Important Points About IS 390
- IS 390:2024 is the current spray test standard. The old IS 390:1975 is withdrawn, so an old report may not match what a buyer asks today.
- IS 390 and ISO 4920 are the same test. This helps when your order comes from outside India.
- Other BIS product standards call IS 390 inside their requirements. For example, the nylon fabric standard IS 4399:2023 refers to it.
- Some product standards also set a minimum spray rating. Always read the exact clause for your product.
Simple Example
Suppose you make nylon fabric for industrial use. Your buyer asks for a test as per the product standard. That standard points to IS 390 for water repellency. So you send the fabric to the lab, ask for IS 390:2024, and write the exact version in your request. Simple.
Is BIS Certification Compulsory?
Not always. Many textile product standards are followed under voluntary certification. But some products can come under a quality control order, and rules change from time to time. So before you print an ISI mark or claim BIS compliance, check the latest status for your product on the BIS website. And do not assume a test report alone means a BIS licence.
Tips for BIS-Based Testing
- Write the full standard number and year in your sample request, like IS 390:2024.
- Ask the lab to confirm that the test is within its scope of recognition or accreditation.
- Match the standard to the product. Spray test for surface wetting, IS 7016 (Part 7) for coated fabric penetration.
- Keep the final report and batch details together for future audits and buyer queries.
- Recheck the standard version once a year. Standards get revised.
What Affects Water Repellency of a Fabric?
Two fabrics can look the same and still behave very differently. Here is why.
- Fibre type: Synthetic fibres like polyester and nylon take repellent finishes better than natural fibres.
- Weave and fabric density: Tight weave gives better resistance to water entry.
- Type of finish: Different DWR chemistries give different results and durability.
- Finish application: Wrong curing temperature or wrong chemical amount reduces performance.
- Surface dirt and oils: Dirty or oily fabric loses repellency faster.
- Washing and drying: Detergents and fabric softeners can damage the finish.
- Abrasion and wear: Rubbing in daily use wears off the finish.
- Ageing: The finish slowly weakens over time.
Durability Testing: Before and After Washing
A fabric that passes the test when new may fail after a few washes. So a good test plan checks both.
- Test the new fabric (initial result).
- Wash the fabric as per the agreed method, for example 5, 10 or 20 cycles.
- Dry it in the way the method says.
- Test again and compare the results.
Some buyers also ask for tests after dry cleaning, abrasion or flexing. If your product is for daily use, always do the after-wash test. It shows the real story.
How Samples Are Prepared Before Testing
Before testing, the lab keeps the sample in a standard atmosphere, usually 20 degrees Celsius and 65 percent humidity, for a fixed time. This is called conditioning. Without it, results can change from day to day.
The lab also makes sure the sample is flat, clean and free from wrinkles, creases and marks. This is why the sample you send should be fresh, unwashed (unless the test needs washing) and not touched by oil or dirt.
Step-by-Step Process of Water Repellency Testing
Here is how the whole process usually works.
- Understand the requirement: Check what your buyer, product or market needs.
- Pick the test method: Spray, rain, hydrostatic or a mix. Match it to your product.
- Choose a recognised lab: Prefer an accredited lab with textile testing experience.
- Prepare samples: Cut enough fabric from different parts of the roll. Mark batch details.
- Send with a clear request: Mention method, standard version, number of washes, and required rating.
- Conditioning: The lab conditions the fabric in a standard atmosphere.
- Testing: The lab runs the test as per the method.
- Report: You get a report with the method, rating and observations.
- Review and improve: If the result is low, check the finish and process, then retest.
Documents and Details You Should Keep Ready
| Type | What to keep ready |
|---|---|
| Company details | Company name, address, contact person |
| Product details | Fabric type, composition, GSM, finish used, batch or lot number |
| Test details | Standard name and version, number of washes, required rating, buyer instructions |
How Long Does Water Repellency Testing Take?
Simple tests like the spray test can be completed quickly once the sample is conditioned. But tests with washing cycles, or tests on many samples, take more time. Lab load also matters. So the time is different for each case. It is always better to ask your lab for a timeline before sending the sample. And plan some buffer if the shipment date is close.
Cost of Water Repellency Testing
The cost is not fixed. It depends on these things:
- Type of test selected
- Number of samples and number of washes
- Standard and lab chosen
- Urgent or normal timeline
- Extra tests like oil repellency or colorfastness
Best way is to ask the lab for a clear breakup before you start.
Common Mistakes to Avoid
- Writing “waterproof” on a label when the fabric is only water repellent.
- Testing only new fabric and ignoring wash durability.
- Sending a dirty, oily or creased sample.
- Not mentioning the exact standard version in the request.
- Using fabric softener while washing test samples.
- Taking sample only from one corner of the roll.
- Mixing up spray rating scales (0 to 100 and 1 to 5).
- Ignoring buyer instructions and testing with a random method.
Common Problems and Easy Fixes
| Problem | Possible reason | Easy fix |
|---|---|---|
| Low spray rating on new fabric | Weak finish or wrong curing | Check finish amount and curing temperature |
| Good result first, bad after wash | Finish is not durable | Try a more durable DWR and proper curing |
| Uneven results across the roll | Uneven application | Check padding pressure and bath mixing |
| Fabric feels oily or sticky | Leftover chemicals or dirt | Improve rinsing and cleaning before finishing |
| Water leaks under pressure | Fabric is repellent only, not waterproof | Add a coating or laminate, then test hydrostatic head |
Tips to Pass Water Repellency Tests in First Attempt
- Clean the fabric well before applying the finish.
- Use the right finish for your fibre type.
- Follow the curing time and temperature properly.
- Do a small in-house spray test before sending to the lab.
- Check batches from start, middle and end of the roll.
- Avoid fabric softeners and harsh detergents.
- Confirm the standard version with your buyer.
- Send enough sample so the lab can retest if needed.
Who Needs Water Repellency Testing?
- Fabric manufacturers and mills: To check finish quality before selling.
- Garment manufacturers: To confirm fabric meets the product claim.
- Exporters: To meet buyer and market requirements.
- Importers and traders: To verify the quality of imported fabric.
- Private label brands: To protect brand name from complaints.
- Students and researchers: To learn and compare finishes.
Why Choose Diligence Certifications for water repellency testing in textiles Certification?
Testing and compliance can feel confusing, especially when buyer requirements keep changing. At Diligence Certification, we try to make this part simple.
- We help you understand which test and standard suits your product.
- We guide you on documents, sample details and lab coordination.
- We explain the report in plain words so your team can act on it.
- We keep you updated on the latest requirements.
If you want guidance on textile testing and compliance, you can check our textile testing services page. We do not promise any approval or result, but we do promise clear, honest guidance from start to finish.
Conclusion
Water repellency testing in textiles is not just a formality. It is the proof behind your product claim. A fabric may look good and feel good, but only a proper test can tell you how it will behave in real rain.
Pick the right method, follow the right standard, test before and after washing, and keep your sampling clean and honest. Do this, and you will save time, money and a lot of buyer complaints.
Frequently Asked Questions
1. What is water repellency testing in textiles?
It is a lab test that checks how well a fabric resists wetting when water falls or splashes on it.
2. What is the difference between water repellent and waterproof?
Water repellent fabric sheds water for a short time. Waterproof fabric stops water even under pressure.
3. Which test is most common for water repellency?
The spray test is the most common because it is quick and widely accepted.
4. What is the AATCC 22 test?
It is a spray test method that rates how much a fabric surface gets wet after being sprayed with water.
5. What does a spray rating of 100 mean?
It means no sticking or wetting of the fabric surface after the test.
6. What is the hydrostatic head test?
It measures how much water pressure a fabric can hold before water leaks through.
BIS Certification
CDSCO
PESO
CPCB
LMPC
WPC Approval
Global Approvals
TEC
ARAI
BEE
ISO Certification
DGCA Certification
NOC For Steel
APEDA Registration
Business Registration
FSSAI Mark Certification
Legal Services
Trademark Registration
Copyright Registration
Patent Registration



